Ross CrossOver 16 Specifications download pdf (Page 20)

Custom Control Button Setup

When you assign a custom control to a button, you can

give that button a unique name and assign an icon to it.

The images for the icons must be on a USB drive in the

frame when you assign them. Once assigned the icons

are stored in the frame and the USB can be removed.

Each of the tabs can be named.

The conguration of the tabs and custom control

assignment to buttons are stored with the switcher

personality settings.

To Set up the Custom Control Buttons

If you want to assign icons to the custom control buttons,

you must have the images you want to use for the icons

stored on a USB drive installed in the frame. After the

images have been assigned you can remove the USB

drive.

Click the icon in the upper right corner of

the window.

Figure 12: ViewControl Edit Button

Press the custom control button that you want to

set up.

Enter a name for the button in the Button Name

eld.

Tip: You can change the name of a tab by selecting

a button on the tab and then entering a new name in

the Group Name field.

Click the Bank button and select the number of

the bank you want to select a custom control

from.

Click the CC X button and select the number of

the custom control you want to assign to the

button.

Navigate the les on the USB drive and click

the image you want to assign as the icon for the

button.

Tip: Press Default Icon to switch back to the default

icon.

Set up additional custom control buttons as

required.

Press Done when you are done setting up

custom control buttons.

20 • ViewControl — Carbonite Operation Manual (v8.0)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 62 63

No comments

Ross CrossOver 16 Specifications Page 20