Ross CrossOver 16 Specifications download pdf (Page 23)

Use the Time knob to set the length of the

background transition.

Tip: You can also select a time by pressing one of

the 5 through 60 buttons.

Tip: If you have a C2X/C2S control panel, press ME

RATE in the Effects Memory area for the ME you want

to change the rate for, use the keypad to enter the

new rate, and press Enter.

Press NEXT.

Use the Key X knobs to select the length of the

key transitions.

Tip: If you have a C2X/C2S control panel, press KEY

RATE in the Effects Memory area repeatedly to select

the Keyer you want to set the rate for, use the keypad

to enter the new rate, and press Enter.

Wipe Transitions

A Wipe is a gradual transition where one video signal is

replaced with another according to a wipe pattern. In the

example below, a line wipe is being used.

Figure 15: Wipe Transition

For Key transitions, the key is wiped on or off-air with

the transition and the background remains untouched.

The duration of a wipe transition depends on either the

transition rate for the ME, or the rate at which the fader

is moved.

To Set Up a Wipe

A wipe transition requires that you select a wipe pattern,

set the direction and number/size of wipe pattern, as well

as set a background and key transition rate for the auto

transition. A fader transition does not use the transition

rate.

Press WIPE.

Use the Time knob to set the length of the

background transition.

Tip: If you have a C2X/C2S control panel, press ME

RATE in the Effects Memory area for the ME you want

to change the rate for, use the keypad to enter the

new rate, and press Enter.

Tip: If you have a C2X/C2S control panel, press KEY

RATE in the Effects Memory area repeatedly to select

the Keyer you want to set the rate for, use the keypad

to enter the new rate, and press Enter.

Use the Dirctn knob to select the direction that

the wipe travels.

Press the Dirctn knob to toggle Flip-Flop on.

With Flip-Flop on FF, the wipe runs forward

during the rst transition and then reverse during

the second.

Press NEXT.

Use the Pattrn knob to select the wipe pattern

you want to use. You can also select the pattern

by pressing the pattern button directly.

Use the X Pos knob to position the wipe pattern

horizontally. You can also use the positioner.

Use the Y Pos knob to position the wipe pattern

vertically. You can also use the positioner.

Press NEXT.

10.

Use the Aspect knob to adjust the aspect ratio

of the pattern. Not all patterns can be adjusted.

11.

Use the Border knob apply a border to the wipe.

Refer to the section To Apply a Border to a

Pattern on page 23 for information on borders.

12.

Press NEXT. If a border is applied to the wipe,

you must press NEXT multiple times to get to

the next step.

13.

Use the Rot knob to rotate the pattern. Not all

patterns can be rotated.

14.

Use the HMult knob to multiply the pattern

horizontally.

15.

Use the VMult knob to multiply the pattern

vertically.

To Apply a Border to a Pattern

Press WIPE > NEXT > NEXT

Use the Border knob to adjust the size of the

border around the pattern.

Use the Soft knob to adjust the softness of the

pattern border.

Press NEXT.

Select a color for the border.

•

Use the Load knob to select a preset color

for the border.

•

Press NEXT and use the BHue, BSat, and

BLum knobs to select your own color.

Carbonite Operation Manual (v8.0) — Transitions • 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 62 63

Comments to this Manuals

No comments

Ross CrossOver 16 Specifications Page 23

Comments to this Manuals

Related products and manuals for Cars Ross CrossOver 16